High Quality Custom metal surface finishing process
In the actual warehouse management, we often hear that there are situations where the wrong materials are sent out or the wrong materials are sent out. The reason is that it is inevitable that there is a subjective element of carelessness of the warehouse management personnel, and the main and objective factor should be that the location and identification of the goods are not clear. High Quality Custom metal surface finishing process
For example, we designate a warehouse clerk to pick up the goods at a certain location. If he goes to the wrong location and takes the wrong things, it is entirely caused by human factors. And if he neither found the wrong location nor read the wrong sign, but took the wrong thing, this is a management problem.
Storage and identification management
The main content of warehouse standardization management is the division and stacking of materials, and the stacking is inseparable from the specific storage space. Once the materials are stored in the warehouse, the first thing to be solved and clarified is the location of the storage. After the location is determined, the materials will be loaded and unloaded to the ground, so as to reduce unnecessary repeated shipments. Similarly, there must be a clear mark on the landing of the goods to facilitate management and achieve the consistency of accounts, cards, goods and funds. At this point, it is naturally inseparable from the “fourth positioning”, “five-five placement”, and “three cleans and four equals” that we often say. High Quality Custom metal surface finishing process
From this point of view, in daily management, the reason why such and such mistakes occur is that the location management is chaotic and the marking is unclear. On the contrary, the clear management of cargo location and identification can not only greatly improve work efficiency through manual or automatic data collection and electronic data processing in daily management, reduce paper-based management and related costs, and automatic processing can also reduce manual input and processing There are inevitable mistakes in the process, and the standardization of warehouse management has a good foundation.
Warehouse management standardization
The basic requirements for the standardization of warehouse management should be: fixed storage space, unified identification, complete items, and standardized filling.
To standardize warehouse management, we must first realize the standardization of location and identification management. The standardized management of goods location and identification has been realized, and it has been integrated with the material information management system. The warehousing, distribution, and tracking of products will also become simple and easy. Only by strengthening the on-site management of materials and the standardization of stacking and placement can it be realized. Standardization of warehouse management. High Quality Custom metal surface finishing process
For the refined management of warehousing, we must first start with the division and designation of the cargo space of materials, standardize the format of the label, and fill in the content. Logo management is barcoded and standardized.
Through the barcode technology, no matter where the goods in the warehouse go, as long as the barcode management of the product packaging and the out-of-warehouse information are combined, the flow of the goods can be automatically recorded, and the inventory situation can be grasped at any time. And the bar code can also be combined with the wireless network. For example, in the process of warehousing, the custodian can use the wireless handheld terminal to accept the inventory or stocking instructions from the business center, and use the terminal to scan the barcode to complete the inventory or stocking work, which is convenient for physical and financial management. , easily trace the purchase, storage and output of a certain batch of materials, and the inspection and quality inspection data, simplifying the inventory work. Combined with the material management information system and physical inventory, it is easy to obtain the inventory status of materials, query the location of materials, and perform automatic inventory balance and dynamic profit and loss accounting management. High Quality Custom metal surface finishing process
Some Suggestions on Cargo Location and Label Management
- Unified delineation of cargo locations. Carry out unified planning, re-division, and define the division basis and intervals for the storage yard and storage shed, so as to prevent the warehouse keeper from arbitrarily arranging the storage space. Carry out strict cargo location management for goods in and out of the warehouse, gradually promote the application of barcode management technology, realize real-time cargo location query and dynamic allocation and management of cargo locations, achieve real-time contact between front-end applications of inventory management and material sending and receiving operations, and reduce error rates to minimum. In order to promote the standardization and standardization of warehouse management, it is also convenient to cooperate with the electronic monitoring and alarm system to achieve accurate early warning and rapid response.
- Unified logo format. That is, the uniform production format and the required item content for material data are signed, and the introduction of barcodes into material identification is gradually explored. By scanning the barcodes of commodities, real-time query of their storage locations is realized, and at the same time, based on the inventory location information, the location or dynamic Define bins. Dynamically allocate manpower and material resources based on batches of goods in and out of the warehouse, make full use of resources, improve system operating efficiency, and reduce waste of resources. In order to realize the integration of inventory physical management and material information management system, promote the realization of automatic inventory and refined management of inventory.
- Clear identification management and barcode management of commodities. That is, assign responsibilities for the filling, maintenance, and replacement of identification content, so as to achieve standardization of cargo locations and barcode management. The bar code is the unique identification of the commodity. Combined with the current material management information system, through the development of the comprehensive inventory function of the system, random spot checks can be carried out in warehouses, partitions, and cargo locations, and the entire warehouse system can also be regularly inspected for specific types of spot checks. Comprehensive inventory. High Quality Custom metal surface finishing process
- Regular maintenance and management. One is to regularly maintain the demarcated cargo location boundary marks, and the other is to regularly maintain or update the identification signs. Ensure the realization of real-time cargo location query and dynamic allocation and management of cargo locations.
“If the cargo location is clear, it will be marked clearly, and if the mark is clear, it will be managed successfully.” Clear and standardized storage locations and clear and accurate markings are the foundation of warehouse management. With the continuous improvement of modern logistics technology, information technology and warehousing management level, the efficiency of warehouse operation and management will be greatly improved, the time for managing cargo location information in the existing mode will be greatly reduced, and the accuracy of inventory query and inventory will be improved, greatly speeding up Improve the circulation speed of outbound and inbound documents, and reduce the waste of human, financial, and material resources in enterprises. High Quality Custom metal surface finishing process