Story 1: Inspection system for pass rate. plastic injection mold making
During the Second World War, the passing rate of the US Air Force parachute was 99.9%, which means that one of every thousand parachuting soldiers would be killed because of the unqualified parachute.
The military requires manufacturers to pass the pass rate to 100%.
The person in charge of the factory said that they have done their best, and 99.9% is the limit unless there is a miracle.
The military (also known as General Patton) changed the inspection system, randomly picking out a few from the parachute before each delivery, and let the person in charge of the factory personally parachute detection.
Since then, the miracle has appeared, and the pass rate of the parachute has reached 100%. plastic injection mold making
Story 2: Payment method
After the British turned Australia into a colony, because the land was sparsely populated and undeveloped, the British government encouraged the nationals to immigrate to Australia, but at that time Australia was very backward and no one wanted to go.
The British government came up with a way to send criminals to Australia.
This solves the problem of overcrowding in British prisons on the one hand and the labor problem in Australia on the other. plastic injection mold making
There is another one. They thought that the bad guys would be sent away, and the UK would be better.
The British government hires private vessels to transport prisoners, pays for the number of people on board, and makes more money to make more money.
Soon the government found that there are big drawbacks in this. The death rate of criminals is very high, with an average of more than 10%. The death rate of the most serious ship has reached a staggering 37%.
Government officials have racked their brains to reduce the death rate of criminals during transportation, including sending officials to board the ship, limiting the number of shipments, etc., but they are not going to implement it.
In the end, they finally found a way to do it once and for all, that is, to change the payment method: plastic injection mold making
“The fee is paid according to the number of people on board the ship and is paid according to the number of people disembarked. The shipowner can only earn the transportation fee if he lives in Australia.”
As soon as the new policy came out, the death rate of criminals dropped to about 1%.
Later, the shipowner was equipped with a doctor on the ship in order to improve the survival rate.
Story 3: Cleaning standards for toilets
The standard for detecting the cleanliness of a room toilet in a Japanese high-end hotel is: plastic injection mold making
“The cleaners themselves take a drink from the toilet.”
Imagine how clean such a toilet would be.
Story 4: Distribution system of porridge
Seven people live together and divide a large bucket of porridge every day.
The fate is that porridge is not enough every day.
At the beginning, they took the decision to decide who will divide the porridge, one round a day.
Ever since, every week, they only have one day to be full, that is, the day they ate porridge. plastic injection mold making
Later, they began to choose a vocal and morally noble person to come out to porridge.
If there is no power, there will be corruption.
Everyone began to dig their minds to please him, colluding with each other, and making the whole small group smoldering.
Then everyone began to form a three-person porridge committee and a four-person selection committee, attacking each other and porridge, the porridge was all cool in the mouth.
Finally came up with a method:
“It takes turns to divide the porridge, but the person who divides the porridge has to wait for the rest of the people to pick up the last bowl. In order not to let them eat the least, everyone tries to get the average. Even if it is not fair, it can only be recognized. It is.” plastic injection mold making
Everyone is happy and happy, and the days are getting better.
Story 5: A paradise for mutual help and win-win
There is a good Christian who, after his death, asks God to ask God to visit Hell and Heaven to see what is the difference.
In hell, I saw a huge dining table filled with hearty delicacies. plastic injection mold making
I thought: hell life is quite good.
After a while, the time for dining is here…
I saw a group of skinny, dying people sitting around the fragrant meat pot, only because the hand-held spoon was too long, even though they were rushing to send meat to their mouths, they could not eat them. He is anxious and hungry.
God said that this is hell.
They walked into another room, which is the same as Hell. It also has the aroma of broth, and the same long spoon is in his hand.
However, the people here are all red and full of spirits. It turned out that they all took the extra long spoon and fed the broth into the other’s mouth. plastic injection mold making
God said that this is heaven.
The same people, different systems, can produce different cultures and atmospheres as well as huge results.
A good system can suppress people’s bad thoughts, and a bad system will make people’s good wishes go through the wall.
Establishing a system that links results and personal responsibilities and interests can solve many social problems.
This is the power of the system. plastic injection mold making
CNC Machining Service & CNC Machining parts
![Experienced aluminum machining services China Manufacturer](https://xmprecision.com/wp-content/uploads/2018/04/aluminum-machining-services-300x168.jpg)
Experienced aluminum machining services China Manufacturer
![cnc laser service](https://xmprecision.com/wp-content/uploads/2017/10/cnc-laser-service-300x300.jpg)
cnc laser service
![aluminium cnc service](https://xmprecision.com/wp-content/uploads/2017/10/aluminium-cnc-service-300x300.jpg)
aluminium cnc service
![online metal fabrication](https://xmprecision.com/wp-content/uploads/2017/10/online-metal-fabrication-300x300.jpg)
online metal fabrication
![custom metal fabrication shop](https://xmprecision.com/wp-content/uploads/2017/10/custom-metal-fabrication-shop-300x300.jpg)
custom metal fabrication shop