OEM CNC machining metal parts oem metal fabrication
At this year’s Abu Dhabi Visiting Exhibition, the Chinese exhibitors brought 500 types of foreign trade weapons to the exhibition. Customers, so taking this opportunity, we exhibited everything we could, including many magic weapons. OEM CNC machining metal parts oem metal fabrication
After China and the United Arab Emirates signed a large order for the introduction of the L15 trainer aircraft this time, the “selection” swarm drone “rocket launcher” system exhibited by CETC at the defense exhibition attracted the attention of Middle Eastern countries.
This should be the most advanced swarm-type UAV combat system in China at present. It is said that this is the UAV attack system with the largest number of developments and the fastest launching speed in China.
“Choose” the swarm UAV system, using a heavy-duty Mercedes-Benz ACTROS truck as its carrier chassis, with a 48-unit UAV launch tube installed at the rear, if it is not said that this is a UAV combat system, At first glance, I thought this guy was a self-propelled long-range rocket launcher. OEM CNC machining metal parts oem metal fabrication
This should be the second domestically-made 48-unit swarm drone system. my country has also produced a 48-unit swarm drone launch system before, but that is the launch module box of the small Picara. Whether it is equipped with There is a big gap between the size and combat capability of the UAV and the “choice” swarm UAV system.
Each launch tube of the “Select” swarm UAV system has an attack UAV, which can be launched at any time. Moreover, this unmanned aerial vehicle system, like the new rocket launcher system currently installed by our army, can carry out a new round of strikes by quickly replacing the launch module, and the strike effect is doubled.
And you can choose a variety of UAVs, such as attack UAVs, reconnaissance UAVs, and jamming UAVs, which makes the battlefield more versatile. This time, the “selection” of the swarm UAV system selected a large heavy truck as its carrier. The main reason is that the large truck is heavy and can support 48 large joint-mounted launch tubes, and other small vehicles cannot carry it at all. OEM CNC machining metal parts oem metal fabrication
In addition, according to the Chinese data, the “choose” swarm UAV system can carry out multi-platform cooperation, and can even be loaded and used on ships. “Select” swarm drones adopt the most advanced battlefield networking linkage method, which can be perfectly integrated into the battlefield system for combat. The combat radius of the launched drones is more than 160 kilometers, and 48 drone salvos can be fired in the surrounding area. An area of tens of thousands of square kilometers is used to carry out tasks such as comprehensive reconnaissance, battlefield surveillance, and battlefield strikes.
And this is still the combat power of a launch vehicle. Just imagine that if a company-level unit equipped with 4-6 launch vehicles can launch at least 182-288 drones at a time, the range of reconnaissance and strike coverage can be several times. The combat area of hundreds of kilometers and hundreds of thousands of square kilometers poses a far greater threat to the enemy than ordinary traditional weapons.
Moreover, the cost of this thing is lower. After mass production, it can be called the price of cabbage. In wartime, so many drones are enough to saturate the enemy’s air defense system, making it impossible to intercept. The price of a medium-range and short-range air defense missile for traditional air defense forces ranges from tens of thousands to hundreds of thousands of dollars. Intercepting a drone that costs only a few thousand to tens of thousands of dollars is a very low cost-effectiveness ratio. If the fight continues, the missiles of the air defense forces on the battlefield will first consume these low-cost drones, and then the fighters and attack aircraft facing the opponent will have to open their eyes and go blind. OEM CNC machining metal parts oem metal fabrication
It can be said that the “choice” swarm drone system developed by China provides more possibilities and advantages for future operations, with unlimited potential. A large number of advanced drones are developed and used to make operations more autonomous and mobile to improve operational efficiency.
For the Middle East countries, especially the old customer Saudi Arabia, this thing is very suitable for them. After all, they have been humiliated by the Houthi armed forces in Yemen. Ordering a batch of “select” swarm drone systems can ensure safety. Complete more tasks under the premise. For example, in asymmetric warfare against militants, UAVs can conduct frontier reconnaissance, positioning, and strikes to improve combat effectiveness.
Moreover, “choosing” the swarm drone system can reduce the risk of casualties in Saudi Arabia. The traditional combat mode usually requires soldiers to be sent to the front line to perform tasks, which will increase the risk of casualties, and drones can replace personnel to perform some dangerous tasks. In addition, this weapon can form a powerful deterrent to the opponent. The emergence of this kind of drone system is an unknown factor for the opponent, and it may cause psychological pressure on it. After all, there are not many Houthi armed forces in Yemen. The air defense weapon at hand has no resistance at all in the face of massive swarms of drones, and can only be passively beaten. The drones will bring an asymmetric advantage to Saudi Arabia.
To sum up, the “Select” swarm UAV system exhibited at the Abu Dhabi Defense Exhibition has many advantages on the battlefield and can bring many changes to the future combat mode. This kind of unmanned aerial vehicle system will become an important part of future operations, and will greatly improve the combat effectiveness and combat efficiency of the army. This weapon will certainly not be bad in terms of export prospects, and now it depends on who is the first to eat peaches people. OEM CNC machining metal parts oem metal fabrication