Sourcing local metal fabrication shop Manufacturer from China
When I just graduated, I went to Shenyang Machine Tool. Around 2006~2007. Many experiences:
Machine tools generally leak oil and liquid, and sawdust is always kept in the workshop for “flood fighting and emergency rescue”. In many cases, people use oil baths in saunas, and the whole body is covered with oil. Gun drilling oil and hydraulic oil eyewash are normal phenomena. My eyes were smeared by hydraulic oil, but it didn’t seem to be irritating in practice. Sourcing local metal fabrication shop Manufacturer from China
The workshop manager sent workers to use silicone glue (glass glue) to plug the leakage. Several large tubes were piled up, but it didn’t work at all. The workers applied it with their hands. After get off work, the skin on their hands fell off, and they could be peeled off like gloves.
The workshop rolls at 6:00 in the morning and ends at 10:30 in the evening, 7 days a week, all year round. Once in the morning, the leader announced that he would finish the work at hand quickly and give him a rest the next day; but when the work at hand was finished in the evening, he notified the urgent task again, and continued on the next day. I once adjusted the sanding pad with another colleague overnight until roll call in the morning, and continued to work the next day without rest.
When eating in the canteen of the workshop, the food generally smelled of motor oil. The snobbish people who beat rice would hit whoever was more difficult to provoke. At that time, I thought I was easy to bully when I was wearing glasses, and kept ignoring me. . There was a Coke seller nearby, which was called “Very Coke” at the time. I bought a bottle for 4 yuan, took a sip, and found that it was fake. It didn’t taste right at all, and I couldn’t drink it. Sourcing local metal fabrication shop Manufacturer from China
It is stipulated that turning in the workshop park must be at a right angle, and shortcuts are not allowed, and offenders will be fined. No more than two people are allowed to walk side by side, and offenders will be fined. It is stipulated that white work clothes are not allowed to be soiled, and soiling is fined. There are cameras at the intersection, and the above-mentioned problems are photographed and continue to be fined.
Sitting is not allowed in the workshop, nor is it allowed to take any posture that looks like a rest. If there is nothing wrong, you must use “eight distributions (that is, cut up clothes to use as rags)” to continuously wipe the machine tool to prevent surprise inspections by superiors.
The workshop stipulates that the doors and windows must be closed and locked, and they can only be opened when the transport vehicle comes in. It was later learned that it was to prevent reporters from randomly entering and publishing negative reports.
When I went to the design room to draw pictures, the sun was so strong that the reflection on the screen was hard to see clearly, but the regulations forbid the curtains to be drawn, fearing that it would affect the appearance, and the leader was not happy to see it. The design office is not allowed to speak before and after, the reason is that the work of whispering is not full. Sourcing local metal fabrication shop Manufacturer from China
The computer cannot access the Internet, and the USB interface is sealed with tape because of fear of viruses. But in fact, there are not many viruses at all, which can be called virus databases.
Hierarchy, in addition to the relationship, junior college students enter the factory and work in the workshop all the time; undergraduates are thrown into the workshop for “internship” for a year or so before they can be used; In the design room, graduate students can access the Internet on their computers, so there is almost no workload. They often hang on eDonkey to download porn and chat online.
At that time, ordinary cars were sold in volume and sold at a loss. The meaning above was to overwhelm all small factories and form a monopoly of large factories to increase efficiency.
I was working with a special machine for crankshaft oil hole processing in the workshop, and there were various problems. I started to assemble it before I came, and when I couldn’t stand the environment, I ran away. The bed was not finished yet. Disassembled and reassembled, no one is complete, and there are scars from the disassembly process everywhere. Later, there was no other way, and the semi-finished product + a fitter were packaged and delivered to the customer. The legendary “buy a machine tool, get a fitter, buy one get one free”, according to veteran workers, is a common phenomenon. Many beds have problems, so people are sent to do after-sales service, and the fitters sent out are generally recruited by the other party, because they are often broken, so it is better to just work there.
It was still the special machine for oil hole processing. German students came to practice, visit and demonstrate to others. They happened to be shooting PR promotional videos. There were a lot of cameras and onlookers. Coolant (gun drill oil) sprayed everywhere. The scene was quite embarrassing for a time. Later, I saw those German students sitting outside the workshop with dejected faces, as if they had taken the wrong path in life. Sourcing local metal fabrication shop Manufacturer from China
I heard with my own ears a person in charge of sales, proudly introducing the customer with a straight back, which probably means: Even if all the components we use are European versions (control system, hydraulic system, chuck, spindle, etc.), they are still better than foreign ones. High-quality machine tools have a price advantage, because the bed castings are made by ourselves, and our casting workers have the lowest wages in the world, and the cost advantage is unparalleled.
At that time, I heard from the master master that there is also a zero-wage system: that is, apprentices have no wages, and the machine tool assembly is contracted by the master. If you can’t sell it, just keep waiting. One purpose of doing this is to retain people, because people always feel that it is a bit of a loss to leave without getting money, but they keep coming back to life, keep being owed, keep trying to get back their money, and finally become addicted, just like gambling. The drama of fellow don’t leave is not only in the stock market, in fact, someone has been playing it well for a long time! Sourcing local metal fabrication shop Manufacturer from China
In the old factory area (later moved to the development zone), a colleague in the workshop held the round steel (similar to a shoulder pole) pierced out of the bed (machine tool base) and raised his head to direct the crane (the crane on the workshop ceiling, the old-fashioned crane) People have to climb up to start it), and the middle finger was cut off as soon as the word “Luo” was uttered. It turned out that there was a wooden box just below it, which formed a cut with the end of the round steel. In the beginning, dishonesty in the workshop was not considered a work-related injury, but later it was discovered that the colleague’s elder brother was from the personnel department, and when he approached him, the workshop director didn’t say anything. They also sent me to take care of them. At that time, it seemed to be called a hand surgery hospital. Then I saw a lot of stumps and broken legs in the hospital. It was an eye-opener. I saw with my own eyes that a strong man fainted from blood and fainted, an old lady’s whole hand was sucked into a threshing machine, leaving only bones, a little boy’s fingers were necrotic and blackened, and steel nails were still inserted, and a little girl’s hand was skinless and was sewn into her belly to recuperate. , The old man lost his legs and couldn’t accept the reality and wanted to commit suicide… Is this a hell on earth…
There is a pair of twin girls in the workshop. They look exactly the same, and they are not bad. Her actions don’t look like girls’, either, she’s careless and swears all kinds of foul language. Maybe it was cultivated in the factory environment, and this kind of contrast is really unacceptable. Stay away. On the contrary, some male workers are gentle, elegant and versatile. For example, they can show off their tricks with a screwdriver tool, and some even participated in the singing competition at that time.
At that time, it was just in time for the factory to move from the urban area to the development zone, from the dark workshop to the spacious and bright workshop. It felt good, but the process was a pity: there was an air-raid shelter under the old workshop, considering that the land had been sold to The developer built a house, so the air-raid shelter had to be demolished, but there were a lot of tools, parts, etc. stored in it, and the workshop asked us to move it out and sell it to various small processing factories; all kinds of things in the old factory area were forgotten. There are many old drawings in the corner of the factory, which are the crystallization of wisdom from various ages. It was too late to move them away. Some engineers were reluctant to take away part of their own collections, but most of them were probably bought as waste paper; I moved all kinds of things from the car and put them in a temporary warehouse. Many cultural relics have been rediscovered, and there are many treasures, such as a large cabinet of genuine DOS operating systems that have never been opened…. Sourcing local metal fabrication shop Manufacturer from China
In the new factory area, it is far away from where we live, and we need to take a shuttle bus. There was a heavy rainstorm after get off work. The bus driver fought with another driver because of the traffic jam. , shivering with cold. In the end, I had no choice but to get off the bus and take a taxi to go home. As a result, the taxi was also forced to carpool, all kinds of things, all kinds of cold, and it felt like the rain was all over the world. I couldn’t tell who was who. I almost froze to death. There was only one breath left when I got home.
In addition, the shuttle bus emits black oily smoke while sitting, and you can choke to death if you don’t open the window. It is said that it was scrapped from other factories and bought and repainted.
Because of the relocation and the merger of various factories, the management suddenly became chaotic, so when I couldn’t stand the environment and wanted to leave my job, I couldn’t find the HR department to issue a resignation certificate, and I didn’t know where the HR department went! No one knows, so I simply work as a black household in the new unit. . . As a result, I was still white-collared for 2 months of my old salary. Although the money is too f*ckingly small, it’s nice to think about double salary for a job. It was only after 2 months that I found the resignation staff, and after I went through the formalities, I found out that a fitter colleague was about to pack up with the crankshaft oil hole machine tool and send it to the customer…
Tell me after I run away. The blow was quite big. First of all, I felt that I had lost my voice in that environment, and I couldn’t speak after I came out. I went to the hospital to see that I have depression. Later, when I was looking for a job, I felt that I was out of the era, as if I had just come out of prison and didn’t understand anything. When I found out that the bathroom of the new unit also provided white paper to wipe hands, I was so moved that I almost cried, not to mention the meals and recipes in the cafeteria…
I kept wondering what I did in the first place, why I stayed in that kind of place for a few months…. I still can’t adapt to the new job. After working for a year, I have tossed and tossed for a long time.
Finally, I went to work on the Internet. There was an episode at that time. When I entered the job, I saw a leather bag on the seat. I was still asking whose stuff it was. In the end, someone told me that it was yours, a laptop issued by the company. Oops, I felt that I was subverted again, and it turned out to be okay! These are respects that have never been seen in the machine tools before. Sourcing local metal fabrication shop Manufacturer from China